看天堂-看特级毛片-看特级大黄一片-看全色黄一级毛片-看全色黄大色黄女视频-看全色黄大色黄大片视频

Welcome to the official website of Shenzhen Ledfocus Precision Manufacturing Co., Ltd.!
News
News
Hot products

Service Hotline

0755-29727486 0755-83734215 0755-83734236
Industry news

Where are you now:Home >> News >> Industry news
What problems need to be considered in PCBA processing?
Time:2023-11-23 Read: 1884

What issues need to be considered during PCBA processing?

1. Design of single board transmission and positioning elements for automated consumption lines


For automated production line assembly, PCBA must have the ability to transmit edges and optical positioning symbols, which is a prerequisite for production.


2. PCBA processing and assembly process design


The component design structure of the components on the front and back of the PCBA determines the process methods and methods during assembly.


3. Component planning and design


The position, direction and spacing design of components on the assembly surface. The design of components depends on the welding method used, and each welding method has specific requirements for the placement, direction and spacing of components.


4. Assembly process design


For the design of welding pass-through rate, through the matching design of pads, solder masks and stencils, the quantitative and fixed-point stable distribution of solder paste is completed; through the design of planning and wiring, the simultaneous melting and solidification of all solder joints in a single package is completed; Reasonable connection design of holes, 75% tin penetration rate, etc., these design purposes are to improve the welding yield.


Matters needing attention in PCBA processing and welding


1. Warehouse management personnel should wear anti-static gloves when sending materials and testing IQC, and use the instrument to be firmly grounded, and the work surface should be covered with anti-static rubber pads in advance.


2. During the operation, use an anti-static work surface, and at the same time use an anti-static container to hold components and semi-waste products. Some welding equipment can be grounded, and the electric soldering iron must be of anti-static type. All equipment must be tested before use.


3. When the PCBA is processed through the furnace, because the pins of the plug-in components are scoured by the tin flow, some plug-in components will be inclined after being welded in the furnace, causing the component body to exceed the silk screen frame. Therefore, the repair welding personnel after the tin furnace are requested to Abort proper correction.


4. When soldering horns and batteries, PCBA should pay attention that the solder joints should not be too much tin, and should not cause short circuits or scattered surrounding components.


5. The PCBA substrate needs to be placed uniformly, and the bare boards cannot be stacked directly. For stacking, it needs to be packed in electrostatic bags.


Precautions for PCBA processing finished product assembly


1. The whole machine without shell uses anti-static packaging bags


Regularly inspect anti-static tools, devices and materials to ensure that the working conditions meet the requirements.


2. Follow the steps below when assembling the finished product


Warehouse → production line → production line upgrade software → assemble into a complete machine → QC test → write IMEI number → QA full inspection → restore factory settings → storage; software must be upgraded before assembly. Due to improper welding, short circuit, operation process problems, etc., it cannot be upgraded, resulting in misjudgment of poor PCBA.

Contact Us
Shenzhen Ledfocus Precision Manufacturing Co., Ltd.

Address: Room 1204, Dahong (Xinqiao) Science and Technology Innovation Park, No. 48, Xinyu Road, Shajing Street, Baoan District, Shenzhen

Phone: 0755-29727486 0755-83734215 0755-83734236

Person in charge: Mr. Fan 13088821718

Email: roman@leikashi.com

Business section #605

Email: allen@leikashi.com

Website: www.65874.cn

Service hotline
0755-83734236
? 2020 Shenzhen Ledfocus Precision Manufacturing Co., Ltd. All rights reserved 粵ICP備2021139374號
  • Links:
主站蜘蛛池模板: 高h短篇辣肉各种姿势bl | 日本天堂视频在线观看 | 欧美xxoo黑人又粗暴 | 97se狠狠狠狠狼亚洲综合网 | 精品卡1卡2卡三卡免费网站 | haodiaose在线精品免费视频 | 四虎2023| 69短视频| 婷婷激情综合五月天 | 精品欧美日韩一区二区三区 | 久久偷拍人 | 精品区2区3区4区产品乱码9 | 国产成人免费 | 日韩每日更新 | 国产精品最新 | 7777奇米| 狠狠色综合久久婷婷 | 欧美一卡2卡3卡四卡海外精品 | 亚洲色大成网站www久久九九 | 色字当头| 免费波多野结衣庭教师 | 国产午夜精品一区二区 | 国产日韩欧美在线一区二区三区 | naruto堂同人本子汉化gg | 日本护士xxxx视频 | 美女被网站 | 天天黄视频 | 深夜免费在线观看 | 果冻传媒天美传媒乌鸦传媒 | 国产亚洲综合精品一区二区三区 | 国产精品怡红院永久免费 | 青草福利视频 | 色亚洲视频 | 国产裸舞在线一区二区 | 欧美高清一区 | 国产欧美日韩一区二区三区在线 | aaa一级最新毛片 | 艹b视频在线观看 | 亚洲精品一区二区久久久久 | 免费aⅴ在线 | 久久不射电影网 |